Installation & Local Settings Configuration Guide

These two video go over the installation and commissioning process for the Solis low-voltage 16kW hybrid inverter. 

The installation in the video was done in a laboratory, so the process will not exactly reflect a real installation on a home. 

The full installation manual can be downloaded here: https://www.solisinverters.com/uploads/file/Solis_manual_S6-EH2P(9,6-16)K-SV-YD-H-US_V2,0_20250910.pdf

For any questions or comments regarding the installation process, please email us at ussservice@solisinverters.com

How to Install the Inverter and Configure the Settings (Simplified)

00:00 Overview

01:00 Commissioning

03:14 Settings Explained: Inverter Power ON/OFF

03:48 Settings Explained: Storage Mode Settings

08:22 Settings Explained: Battery Settings

12:27 Settings Explained: Smart Port Settings

17:14 Settings Explained: Grid Port Settings

18:28 Settings Explained: Parallel Settings

19:14 Settings Explained: Basic Settings (Time & Date)

19:52 Settings Explained: Professional Settings: Power Limiting & Frequency Derating

20:06 Settings Explained: Professional Settings: Function Settings

20:34 Settings Explained: Professional Settings: CERT Mode Settings (Volt-Watt, Volt-Var)

20:48 Settings Explained: Professional Settings: Protection Settings

21:40 Settings Explained: Professional Settings: Device Settings (Meter & CT Settings)

23:07 Settings Explained: Professional Settings: Device Settings (Derating)

23:28 System Overview

24:15 Inverter Parameters

24:39 Firmware Upgrading

Configuring the Inverter Settings Locally (On-Site) Explained in Detail

00:00 Introduction 

00:10 Connecting to the inverter through Bluetooth using the SolisCloud app 

00:54 Creating an inverter password 

01:39 Quick Setting: Inverter Time setting 

02:16 Quick Setting: Battery setting 

03:17 Quick Setting: Meter/CT setting 

05:06 Quick Setting: Grid Code setting 

05:40 Quick Setting: Storage Mode setting 

06:40 Inverter home page/screen 

08:53 Setting Tab overview 

10:37 Firmware upgrading locally 

13:05 Storage Mode settings

19:23 Battery settings 

22:54 Smart Port Settings (generator, AC-coupled PV, sheddable load) 

27:03 Grid Port Settings 

27:47 Parallel Settings 

28:30 Basic Settings (time/date settings) 

28:40 More Function Setting 

28:50 Professional Settings (power limit, frequency derate, function settings) 

30:10 Device Settings (factory reset, change password, meter/CT settings) 

31:21 Information Tab (PV, battery, load, grid, parallel, more) 

34:35 Alarm Tab (current & historical alarms) 

34:57 Conclusion