Note: The LG battery weighs around 215 pounds and requires at least two people in order to be mounted safely
- First, remove the wall mounting bracket from the battery box as well as the manual and wall mount bolts
- Next, mount the bracket to a flat wall using the proper hardware - see proper clearances below and use a level
- The building should be designed to withstand earthquakes
- A waterproof, well-ventilated, north-facing wall is preferred
- The battery should not get direct sunlight or it is likely to overheat
- Proper clearances:
- 12" from both sides and the top
- 24" from the bottom
- Once the bracket is secured, the battery will need to very carefully lifted up and onto the bracket - the battery should rest on the bracket's two curved metal grooves
- Tighten the two hex-socket screws enclosed. The nuts for these screws are welded to the battery pack chassis. Tighten to a torque of 5 N•m using the M6 torque wrench.
- Open the wiring box cover by pulling on the two latches on the rear of the battery's bottom right corner.
- To remove the cover completely:
- Open the door just slightly (2 to 10 degrees)
- Give the door a gentle tug and it should come free
- To remove the cover completely:
